Question: What Is The Benefit Of A Stroker Motor?

Are stroker motors reliable?

A few years ago stroker motors weren’t very reliable but with testing and redesigning now they are almost as reliable as a stock motor as long as you treat them right..

How much HP does a 383 stroker make?

That combo would probably make around 465 hp and nearly 500 lb-ft, but at less rpm. But never mind that. The point here is 502 lb-ft at 4,700 rpm and 500-plus horsepower from 5,700-6,200 rpm….Hot Rod’s Proven Recipe For A Simple Chevy 383 That Knocks Down 500 HP And 500 LB-FT.True 383 PowerRPMLB-FTHP6,20042550222 more rows•Oct 13, 2009

What does Stroker mean in engines?

A stroker engine is basically just an engine that has had the stroke increased to more than was originally from the factory. A stroker kit is a collection of components that make building a stroker engine possible. … By increasing the stroke of the engine (and also the bore, too) you can increase the size of the engine.

How much does it cost to turn a 350 into a 383 stroker?

Re: Building a 383 Stroker, costs and challenges You can put a 383 together to handle about 400-450 horses for probably $1500-$1600. That would be a short block. It’s probably possible to build it for around $1200 everything off a 400 and 350 except for new pistons, rings, and bearings.

How much does it cost to bore a 350 to 383?

The machine work is usually in the $250~300 range for bore & hone to size ( including cam bearing install if desired). Bottom edges of block may need light relieving to clear rod bolts.

How long will a 347 stroker last?

Seriously, I keep reading the 347 stroker is unreliable by design and to expect a long life from one, in a primarily street application, be it mustang or truck is not realistic. I think the general consensus is, you can expect it to live to 40-60,000 miles but by then it would be worn out.

Does a stroker motor sound different?

Not really. The sound change would most likely be due to other parts of as package like headwork, different valves, camshafts, etc. If the only mod is the actual stroker stroker, there may be a tiny change in sound due to added displacement, but nothing radical or choppy. Maybe just a slight deepening in tone.

How much HP does a stroker kit add?

So, as a given rule, the more cubic inches an engine is, the more power it will make. However, the horsepower output will largely depend on the overall combination you are using. We could take a 500″ short block and with stock heads and a mild cam, it might make around 450-475 horsepower.

How much does it cost to install a stroker kit?

It will cost the price of parts plus the labor to build the motor and r & r the motor. You can buy a stroker shortblock from Livernois (or MMR or others) for 4500.

What year is the best Chevy 350 engine?

L31 (2002) From a purely technical standpoint, the most recent version of the Chevy 350 would naturally be the best of the bunch. Marketed as the “Vortec 5700” engine, but known internally by the moniker of L31, this engine was used primarily in GM vans and trucks until 2002.

What’s the difference between a 383 and a 383 stroker?

A 383 Stroker is just the opposite, It uses the stock size bore but uses an aftermarket crank to get a longer stroke.

How long do stroker engines last?

A stroker will last quite a long time depending on how you treat it and how high you rev it. A stock engine can go over 200k with real good care…a stroker will be less.