Quick Answer: What Is The Thickest Oil I Can Put In My Car?

Will the wrong oil damage my engine?

Using the wrong oil can lead to reduced lubrication and shorter engine life.

If the manual says to use synthetic oil, do so.

Contrary to what some believe, adding synthetic oil to regular oil won’t harm the engine, but there’s also no benefit in doing so..

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Is 10w40 good for high mileage?

High mileage protection Mobil Super High Mileage 10W-40 uses a combination of synthetic and conventional high quality base oils combined with modern performance additives to help provide long engine life and outstanding protection for vehicles with more than 75,000 miles.

Can I mix 5w30 with 10w40?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40. … Mixing different oils will not improve the performance or efficiency of the engine in any way.

Does 10w40 hurt 5w30 engine?

The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

When should I use 10w40 oil?

When to Use 10w30 vs 10w40 Using 10w30 oil in cold weather will help reduce excessive oil temperatures and drag as the engine warms up. Using 10w40 oil in the summer will help the oil stick to internal components in high temperatures, avoiding the wear and tear from metal-to-metal contact between moving parts.

Is 5w30 oil thicker than 10w30?

10w30 is thicker then 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil. Thicker oil offers better lubrication of motor and engine parts.

Do high mileage cars need thicker oil?

High-mileage motor oil doesn’t hurt and it could prevent leaks from starting. … Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.

What is a good thick motor oil?

Drivers commonly use 10W-40 motor oil in vehicles with higher mileage because the oil is thicker while the engine is hot; this helps lubricate older moving parts. This oil is meant to start up vehicles in winter climates that experience temperatures of 10 degrees Celsius.

Is synthetic oil better for high mileage cars?

High mileage oil is designed for vehicles with more than 75,000 miles. … This leads to less leakage and oil burn-off, which can be common in older cars. If your vehicle is high-mileage and high performance, it’s suggested that you go with this type of synthetic oil. Not every car requires synthetic or high mileage oil.

Is it better to use thicker oil in older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

What happens if you put wrong oil in your car?

You might notice a few oil spot in your garage or under your car because using the wrong oil can lead to leaks, or you might become aware of a burning smell while driving. If the oil isn’t working as it should engine parts might not be lubricated well enough and cause friction, which can burn the oil.

When should I use 20w50 oil?

Warmer Temperatures 20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

Is mixing 5w30 with 10w30 bad?

Mixing different oils will not improve the performance or efficiency of the engine in any way. The additives in synthetic oil may have limited or no effect at all when mixed with a regular engine oil. … 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature.

When should I use 5w30 oil?

The lower viscosity of 5W30 will be perfect for use in cold weather as the oil is thin enough to get into different parts of the engine even in cold weather and to ensure easy startups. The thinner nature of this oil will ensure your vehicle maintains optimal performance in winter.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

What happens if I put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Is 20w50 good for high mileage?

The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. The thickness is not meant for daily, older vehicle use.